Tag: mold trial
-
How Scientific Molding Builds a Shift-Proof Process Window
Process Development Scientific molding is process development done in the right order. First you measure how the resin behaves. Then you set fill speed from a viscosity curve and weigh parts to find gate seal. Lock the window that results. A scientific process survives resin lot changes and shift changes because it controls the plastic,…
-
How Much Clamping Force Does Injection Molding Really Need for Your Part?
Machine Sizing Clamping force in injection molding is the tonnage a machine holds on the mold during filling. It keeps the tool shut while molten plastic tries to push it open. The standard estimate multiplies projected area by cavity pressure, divides by 1,000 for metric tonnes, and adds a 10–30% margin. Too little means flash;…